Door Knob Bumper

S. Parkers 636 series offers solid brass material, with a soft door knob bumper to reduce impact. Overall, the base is 2 1/4" in diameter, and the bumper projects 3/4" from the wall. The regular unit attaches to the wall with a screw, but 636U TAPE is a self stick base model, 1 5/8" in diameter with a 7/8" concave projection.

High Dome Door Stop

S. Parker 13H High Dome Door Stops are Type FF-H-111B-1330AE, and are 1 3/8" high, with a 2" diameter base. They require 1/2" of under-door clearance. They have aluminum, polished brass or dull chrome fin ishes.

Low Dome Door Stop

S. Parker's low dome door stops solve door clearance problems. These Type FF-H-11B-1130E door stops are 1" high with a 2" base diameter. Required under-door clearance is only 1/8". Some are solid brass material and they come in aluminum, polished brass or dull chrome finishes.

Covered Chain Door Stop

For exterior use, S. Parker's heavy duty 1631 series of covered steel chain door stops come in two finishes and four sizes, and are designed for heavy duty commercial use. Top quality stopping and cushioning effects, use strong compression springs to maintain those qualities. The vinyl cover protects door surfaces. The chain door stops are complete with solid brass mounting plates.

Floor Style Door Stop

Floor style door stops, without hooks, come in two finishes, with bases designed to be installed on concrete or wood. The door stops are 3" high, with a 2 1/2" base. The non-aluminum finish models are solid brass, while the aluminum finish models are aluminum.

Floor Style Door Stop and Holder

S. Parker floor mount door stop and holder units are 3 1/2" high, with a 2 1/16" diameter base. The non-aluminum finish models are solid brass, while the aluminum finish models are aluminum.

Wall Door Stop

The S. Parker wall stop holds door in place, and serves to prevent damage to wall and door when the door is opened forcefully. The door stops have a 3 1/2" projection, and a 2 1/2" diameter base. The non-aluminum finish models are solid brass, while the aluminum finish models are aluminum.

Door Stop and Holder

Door stops and holders come with hooks, and are designed to work best with the specified floor material-wood, or concrete or tile. Projections are 3 1/2", and the bases are 2 1/2" in diameter. The non-aluminum finish models are solid brass, while the aluminum finish models are aluminum.

3 1/2" Projection

Use "S" items for concrete or tile surfaces.
Use Non "S" items for wood surfaces.

This S. Parker door stop with holder has a shorter 2 1/2" projection from the wall for places were space is a problem. The base is 2 1/2" in diameter.

Kick Down Lever Type Door Holders

S. Parker carries a wide array of kick-down door holders in solid and cast brass, die cast alloy, and cast alu minum. All are packed with screws for easy installation. and all have replace able rubber tips. Tip replacements for the below series are 135 RT and 1235 RT.

Step Down Door Holders

Step down door holders have replace - able rubber tips, and come in two sizes and five finishes, in die cast alloy. Replacement tips are 347 RT and 342 RT.

L Type Door Stop

The S. Parker L type door stops are easily installed, and take very little space. Overall height is 1 3/8" and projection from the back edge is only 1".

Rigid Door Stop

The rigid door stop mounts on the wall or baseboard, quickly and easily. It is made out of cast alloy with a 3" projection to keep the door knob from striking the wall.

Spring Door Stop

This door stop model has a spring wound shank, and is cast alloy, with a 3" projection. The 39 series is plated with a plastic base. The BIN pack spring door stops come with a metal base and come in a bin pack of the specified quantity with UPC

Heavy Duty Spring Door Stop

The S. Parker heavy duty spring cone wound door stop softens door impact, and comes in plated brass, with a 3" projection.

Hinge Pin Door Stop

The S. Parker hinge pin door stop is brass plated or satin nickel, and attaches quickly to most hinge pins.