Pneumatic Door Closers

S. Parker 62000 Series pneumatic door closers come in three finishes, and are for outward swinging doors. They provide a full 90 degree opening, with a valve to easily adjust closing speed. The closers are permanently lubricated and come in a clamshell visual pack, with necessary hardware. Economy and Standard grades are available.

Economy

Standard

Shock Absorbing
Pneumatic Door Closers

S. Parker's shock absorbing pneumatic door closers are for outward swing doors, and have a full 90 degrees of opening. Closing speed is easily adjustable using one screw, and three colors, and two grades are available to suit different strength and durability needs. The closers are permanently lubricated, too.

"Storm Guard"

Extra Heavy

Standard Hydraulic
Door Closer

S. Parker hydraulic door closers for storm and screen use have rustproof aluminum tubes, and an action that is not affected by temperature. The closers are for outward swinging doors, and give a 90 degree opening. Permanently lubricated, the closing speed is adjustable, and may also be regulated for summer or winter use.

“I” Style Push Button Latch

S. Parker's Push Button Latch for storm doors has an “I” style tie-down handle, and needs only three 1/4" holes for installation. The inside latch has an anti-lockout feature. The latch works on outswinging doors from 7/8" to 1 1/4" thick, and comes in a clamshell pack. Models 64090, 64092 and 64091 are identical to 64000, 64002 and 64001, but add a key-lock for greater security.

“W” Style Push-Button
Latch with Handle

The 64300 (aluminum) 64301 (black) and 64302 (white) W-style push-button latches feature an anti-lockout exterior handle, 1 3/4" mounting hole spacing, and installation in three 1/4" holes. The latch is for outward swinging doors that are 7/8" to 1 1/4" thick. The latches come in clamshell packs.

“W” Style
Push-Button Latch

The S. Parker 64200 series of W type push-button storm door latches feature 1 3/4" mounting hole spacing, installation through three 1/4" holes, and acceptance of door thicknesses from 7/8" to 1 1/4". The latches have an anti-lockout feature, and work on outward swinging doors. Model 64200 is aluminum, model 64201 is black and model 64202 is white. The push-button latches come in clamshell packs.

“I” Style Knob Latch

The 64400 (aluminum), 64401 (black) and 64402 (white) “I” style knob latches for storm and screen doors take 3" mounting hole spacing, using three 1/4" holes. It works on all outward swinging doors from 7/8" to 1 1/4" thick, and comes in a clamshell pack. Model 64490 is identical to 64400, but has a keyed lock in the knob. The latches come in clamshell packs.

The S. Parker 64500 (aluminum), 64501 (black) and 64502 (white) knob latches have an “I” type strike plate, and install in three 1/4" holes on 1 3/4" spacing. The latches work on outward swinging doors from 7/8" to 1 1/4" thick, and non-keyed latches come in a clamshell pack; keyed latches are carded.

Inside Latches

Inside storm and screen door latches in S. Parker’s 64101, 64011 and 64012 models fit a 1 1/2" hole spacing, while the 64110, 64111 and 64112 models fit a 1 3/4" hole spacing.

Hinge Pin Door Spring

The 21200 Hinge Pin Door Spring serves to keep screen doors from standing open and is easily installed.
The 5 1/2" wide spring is carded.

Screen Door Catch

The 23200 Screen Door Catch is zinc plated, sturdy, easily installed and is carded.

Screen Door Pull

The 24200 zinc plated and 24300 brass plated Screen Door Pulls are rapidly installed, sized to fit the hand, and come complete with screws and are carded.

Spring Chain Door Stop

Spring chain door stops absorb shock to prevent damage to doors that are blown open or otherwise forced back too far against their hinges. The S. Parker model has a hold-up spring that keeps the main chain from damaging the door surface.

Screen Door Strike

The 66000 (aluminum), 66001 (black) and 66002 (white) screen door strikes replace worn or damaged strikes on screen and storm doors, and are carded.

Adjustable Door Spring

S.Parker’s 65100 adjustable door spring gives screen or storm doors a positive closing action, and is fully adjustable to work with a range of door widths. The sturdy steel construction of the spring is protected with aluminum paint finish.

Screen Door Kit

Kit consists of: one pair of Spring Hinges, one 4 7/8” door pull, one 2” hook & eye, 14-9 x 3/4” flat head screws.

Screen Door Hinge for Indoor and Outdoor Use

Preset spring tension automatically closes lightweight doors.

Panel Replacement Clips